Trimmereo.com is reader-supported. When you purchase through links on this site, we may earn an affiliate commission.

Best Electric Shaver Saver Spray Cleaner and Lubricant Oil

Unleash the full potential of your electric shaver with the ultimate grooming secret: The best Electric Shaver saver spray cleaner and Lubricant oil. Ever wondered why your shaver isn’t performing at its peak? It’s time to lift the curtain on the unsung hero of grooming maintenance.

While the advantage of no longer purchasing blade refills is evident, it’s important to note that, over time, the foils and blades of your electric shaver will require replacement. Given the potential high cost of some replacements, maintaining the longevity of your shaver becomes crucial.

To preserve the optimal functioning of your electric shaver, proper cleaning and lubrication are essential. This article focuses on a must-have product for electric shaver users: a cleaning and lubricating spray.

Why should you use a spray cleaner for your electric razor?

  • An electric shaver-specific aerosol cleaning spray is formulated to efficiently clean, lubricate, and safeguard the cutters against corrosion and wear. Its safe application extends beyond electric shavers to clippers and hair trimmers.

  • The cleaning and lubricating spray excels at removing dirt, gunk, or dead skin while simultaneously applying a layer of lubrication. This dual action reduces friction and minimizes heat generated during use.

  • It effectively dismantles hard water buildups on the cutting parts, a common result of cleaning your shaver with water. This breakdown not only preserves the cutting components but also diminishes wear, alleviates stress on the motor, and ensures optimal performance.

  • Ideal for rejuvenating older shavers, this cleaning spray is a game-changer for those experiencing reduced efficiency. If your shaver isn’t performing as effectively as before, yet the foils and blades are not worn out to the point of replacement, you’ll be astonished by the transformative impact of such a product.

Common ingredients found in cleaning sprays include Isobutane, Methylal, Isopropyl Alcohol, Silicone and Fragrance.

The best spray cleaners and lubricants for electric shavers

There are many options to choose from, but I will stick to just four of them, mainly because they’re inexpensive, widely available and they work great.

This product is among the most widely acclaimed in its category, garnering praise from users worldwide.

In this guide, I’ll be utilizing this particular spray cleaner, and I can personally attest to its exceptional quality and effectiveness.

Remington Shaver Saver Having tried various brands over the years, the Remington spray cleaner stands out as the best in my experience.

Its lubricating properties are unparalleled, leading to significant enhancements in the performance of my shavers.

On the downside, it does come with a potent chemical scent, but this dissipates entirely once the treated parts have dried.

It’s worth noting that as of 2020, Remington Shaver Saver lubricating spray may be challenging to locate in certain countries, particularly in Europe.

What we liked

  • Helps to clean and lubricates all electric shavers and offers convenience
  • The device helps to maintain shaver speed and keeps the cutter cool
  • Comes in a compact size that makes it convenient to carry

What didn’t like

  • May be greasy in texture

If this product proves elusive, consider exploring the next available option.

In my opinion, the Cool Care Plus spray from Andis is a strong contender and the next best option.

Although it’s primarily marketed as a lubricant and cleaner for clippers, it proves highly effective with both rotary and foil electric razors.

Conveniently, it’s readily available and comes in a sizable container (15.5 OZ/439g).

Why does it take the second spot? Well, the Remington Shaver Saver appears to be slightly more effective, especially when dealing with more worn blades. Nevertheless, the Cool Care Plus spray performs admirably, and I wholeheartedly recommend it.

It excels in keeping blades cool, even with electric shavers that tend to generate more heat, such as those from Panasonic.

What we liked

  • Five-in-one formula works as coolant, disinfectant, lubricant and cleaner
  • Features special grip that makes it easy to hold
  • Comes with a nozzle that makes it easy to spray and use

What didn’t like

  • May arrive broken due to ordinary packaging

Additionally, the fragrance is more pleasant, offering a refreshing scent, particularly noticeable when shaving the area below the nose.

Then, we have options from two major electric shaver manufacturers: Braun and Philips.

These serve as viable alternatives if the previously mentioned two are unavailable, but in my experience, they don’t quite measure up.

While both Braun and Philips sprays boast good cleaning properties and a pleasant scent, they don’t match the efficiency of the first two as lubricants.

During use, my shavers tend to warm up and don’t perform as effectively with these options.

I’ve included them here because of their popularity and reasonable pricing, especially in Europe. The Philips spray cleaner (HQ110) stands out for its affordability and widespread availability in the UK.

What we liked

  • Universal for any foil razor
  • Beautiful and luxurious design
  • Comes in a compact size that makes it convenient to carry

What didn’t like

  • Does not create mist as described but very watery

However, if possible, I would strongly recommend opting for the first two choices from Remington and Andis.

Wahl Premium Hair Clipper Blade Lubricating Oil for Clippers, Trimmers, & Blade Corrosion for Rust Prevention – 4 Fluid Ounces – Model 3310-300A
  • Rust Prevention – Prevents rust from forming & helps extend the life of the clipper & blades; can also reduce the likelihood of blades becoming dull
  • Prolongs Blade Life – Apply two drops of oil on the left corner, two drops on the right corner, and a single drop in the middle of the blades every few haircuts for optimal blade lubrication and to reduce friction and heat
  • Premium Formula – Wahl’s blade oil is specially designed for all Wahl electric hair clippers, trimmers, & blades; works well with other brands & blades
  • Give the Gift of Quality – Makes a great add on gift to be combined with a clipper or trimmer.

Elevate your grooming game with Wahl’s premium blade oil, the ultimate choice for maintaining electric hair clippers, trimmers, and blades. This specialized oil is not only perfect for all Wahl products but is also compatible with other brands, ensuring versatile care for your grooming tools.

Its advanced formula is engineered to prevent rust and prolong the life of your clipper and blades, simultaneously reducing the chances of blades becoming dull.

A few easy steps – just 2 or 3 drops of oil between the blades every few haircuts – will ensure optimal lubrication, minimizing friction and heat for a smoother, cooler performance.

Since 1919, Wahl clippers and trimmers have been the go-to choice for professionals in salons and barbershops, known for their self-sharpening precision blades that guarantee a sleek, efficient shave.

This legacy of excellence is embodied in every drop of Wahl hair clipper oil, housed in a handy 14-ounce bottle. A gentle squeeze releases the perfect amount to cover both cutting and guard blades, spreading evenly for comprehensive protection.

Wahl Premium Blade Lubricating Oil

The oil’s superior formulation works relentlessly to minimize friction, preventing the grinding of dry blades that can lead to tension, overheating, and subpar cutting performance.

Comprising 95% pure white mineral oil, this refined, petroleum-based lubricant is designed for longevity, with fast-acting properties to keep your blades in top condition. The remaining 5% includes non-toxic, lubricating agents and synthetic oils, enhancing deep lubrication and blade protection.

After application, a protective layer remains, effectively shielding your blades from rust. Among the various oils reviewed, Wahl’s clipper oil stands out for its effectiveness in maintaining blade quality. Its unique formula is designed to nourish and protect without leaving any residue or odor, thanks to its clear, odorless composition.

Moreover, its high boiling point ensures stability across all temperatures, while its low viscosity means it works quickly and efficiently, treating your blades without delay. At times when your blades need extra care, Wahl’s blade oil is the ideal solution, highly sought after for its premium quality. Don’t miss out – secure your bottle today and enjoy swift delivery from the link below.

Note: Remember to consistently apply the oil every 2-3 uses of your clippers. If you don’t notice an improvement, Wahl offers a hassle-free refund within 30 days, ensuring your complete satisfaction.

What we liked

  • The oil helps prevent the blades from rust and ensures durability
  • Premium formula is ideal for Wahl electric hair clippers, trimmers and blades
  • Helps to reduce friction and heat caused by unlubricated blades

What didn’t like

  • May cause skin irritation for some
Andis Clippers Clipper Oil 4 oz
6,787 Reviews
Andis Clippers Clipper Oil 4 oz
  • Cutting machine oil to lubricate and clean the blades
  • Formulated to be colorless and odorless
  • It helps that there is less friction between the metal and the blade is heated less
  • For more accurate and safer
  • A care oil applying blade, preventing oxidation and extending the life of the blade

Revitalize your grooming tools with Andis hair clipper oil, a top contender in the world of hair clipper maintenance. Trimmereo, your trusted advisor in all things related to hair clippers, acknowledges that while Andis may not match Wahl oil in every aspect, it shines in its unique strengths.

Andis hair clipper oil is the epitome of what a hair clipper oil should be. Its lightweight formula, boasting 80% mineral oil, offers ample lubrication to keep your blades running smoothly. It efficiently reduces friction and wards off corrosion.

However, its 8-ounce bottle design presents a slight challenge; the robust no-drop lid ensures no spills, but it can make dispensing the oil a bit tricky. In our review, we noticed that applying the oil accurately was a bit cumbersome, with minor spillages occurring during testing.

Yet, once you get past this minor hiccup, the quality of Andis oil stands tall among its competitors. Similar to Wahl, it has a balanced mix of lubricating agents and synthetic oils, ensuring effective lubrication for your clipper blades. But Andis has a unique ace up its sleeve.

Enter the Andis cool care line, the secret weapon that sets Andis apart. This range of products, when used in conjunction with the clipper oil, delivers a transformative experience for your blades.

The Andis blade care deeply cleanses, while the refreshing lubrication from the clipper oil gives your blades an unparalleled edge. Even the most stubborn micro hairs tucked away in your clippers are efficiently dealt with when using this powerful duo.

This Andis combination is a game-changer for those dedicated to meticulous maintenance. For optimal blade care, pair the Andis clipper oil with its blade care counterpart and witness a remarkable rejuvenation of your blades. This duo promises longevity and resilience, ensuring your blades withstand the test of time and remain effective against heat and friction.

Experience the rejuvenating power of Andis clipper oil and blade care. If it fails to meet your expectations, rest assured that a hassle-free refund is available. Embrace the Andis way for a grooming experience that goes beyond the ordinary.

What we liked

  • A tight seal helps to prevent spillage
  • Usable on all Clipper brands
  • good corrosion resistance

What didn’t like

  • The cap can be difficult to open and is not the easiest to use.

Philips Norelco Jet Clean Solution, Fresh Scent, HQ200/52
  • The Jet clean solution thoroughly washes away stubble and debris
  • Not only cleans, but also lubricates the blades
  • The cleaned and lubricated blades give you a superior shave day after day
  • 1 bottle of solution lasts for up to one month of daily cleaning
  • Alchohol-free jet clean solution

Experience the pinnacle of shaving performance with the Philips Norelco Jet Clean Solution HQ200/52, specifically designed to keep your razor in prime condition. This solution, when used with the Jet Clean system, delivers a comprehensive cleaning that rejuvenates your shaving heads.

The Jet Clean solution offers more than just a clean shave; it deeply cleans and lubricates your shaving heads. After its use, your Philips electric shaver’s heads will not only smell and look new but also perform like they just came out of the box. Indulge in the refreshing Cool Breeze scent left on your shaving heads, enhancing your shaving experience with a fresh and invigorating feel.

This high-efficiency solution does an exceptional job of removing stubble and debris, ensuring that your blades are not just clean, but also well-lubricated for a smoother, more comfortable shave. Daily use of the cleaned and lubricated blades provides an unparalleled shaving experience.

One bottle of the Philips Norelco Jet Clean Solution offers up to a month’s worth of daily cleaning, making it both practical and economical. This alcohol-free formula is gentle yet effective, suitable for use with various Philips models.

Key Features:

  • Ensures maximum shaving performance by keeping your razor in perfect condition.
  • Unique Jet Clean formula cleans and lubricates shaving heads for an exceptional shave.
  • Leaves behind a fresh Cool Breeze scent for an invigorating shaving experience.
  • Effectively removes stubble and debris, extending the life of your blades.
  • One bottle lasts up to a month, offering daily cleaning without the need for frequent replacements.
  • Alcohol-free solution, compatible with a wide range of Philips electric shavers.

Maintain the best performance of your shaver with the Philips Norelco Jet Clean Solution HQ200/52 – your solution for a cleaner, fresher, and more comfortable shaving experience.

What we liked

  • The jet clean solution thoroughly washes away the stubble and debris
  • 1 bottle of solution lasts for up to one month of daily cleaning
  • Comes in a compact bottle that makes it easy to store and use

What didn’t like

  • May not be compatible with all Norelco razors

How to Clean Your Electric Shaver Using a Spray Cleaner

Now, let’s explore the proper use of a cleaning spray. For this demonstration, I’ll be using Remington’s Shaver Saver, but the process is applicable to any similar product.

Given that the Remington Shaver Saver is an aerosol spray, application is remarkably straightforward. Ensure that the blades and foils of your shaver are dry before spraying. If you’ve rinsed your shaver with water, allow it to air dry before applying the spray. Additionally, remove any excess hairs from the shaving head.

As you may know, electric shavers come in two types: foil and rotary.

Cleaning Foil Shavers:

Before applying the spray, gently tap the foil frame on your countertop or use a fine brush to remove most of the hairs.

electric-razor-cleaning-hairs

Avoid using the brush directly on the foils to prevent damage. While you can spray the foils directly on the shaver, I prefer to remove them to avoid spraying the rest of the shaver.

For Panasonic and Remington razors, where the inner blades and outer foils are separated, spraying becomes easier.

Generously spray both the blades and foils, placing them on a paper towel with the can positioned about 2 to 3 inches away.

electric-shaver-cleaning-spray

Hold down the blades with your free hand to prevent them from being blown around. Do 2 or 3 sprays, flip over the foil frame, and spray the inside.

Reassemble the parts, turn the shaver on, and let it run for 5 to 10 seconds to ensure even distribution. Allow the foils to air dry completely before using the razor.

braun-shaver-cleaning

Cleaning Braun Cassettes: For most Braun shavers, where blades and foils are integrated into a single piece called a cassette, remove the cassette, place it on a paper towel, spray the foils, flip it over, and spray the inner part. Ensure proper drying before use.

braun-shaver-cleaning

Cleaning Rotary Shavers:

For rotary shavers, whether from Philips Norelco or Remington, the process is similar. Remove excess hairs using the included brush or by rinsing the shaving heads with water. Let them dry before applying the spray.

Disassemble the shaving unit to access the inner cutters. Avoid mixing blades and guards, as they are matching pairs. Spray both the rotary blades and the interior of the combs, then reassemble. Let the shaver run for 5 to 10 seconds.

philips-norelco-s9000-prestige-shaving-heads

I prefer to remove the head from the shaver for faster drying. Cleaning sprays don’t clog shavers or leave oily residues. They often have a pleasant scent, contributing to the sensation of a clean razor.

How Often to Use a Cleaning Spray: The frequency depends on your shaving and cleaning habits. If you only shave dry without using soap, applying the spray once or twice a week should be sufficient.

If you clean your shaver with liquid soap and water, lubricate it after each cleaning involving soap. Use the spray according to your needs, either as a standalone or in conjunction with other cleaning methods.

panasonic-shaver-spray-cleaning

Personally, I clean my shavers with soap and water after every use, whether wet or dry, and spray the foils and blades before each shave.

The Remington spray, my favorite, efficiently removes any missed traces of dirt, making my shavers work smoother. It transformed my older Panasonic shaver, enhancing its performance significantly.

FAQs

How to oil hair clippers?

To oil hair clipper blades, place 3 drops of oil across the teeth of the blades (where the front cutting rail and top cutter meet). Place two drops on either side of the blades.

Turn the clipper on and allow work the leaver to allow the oil to spread then wipe away any excess oil. For more details, read above full step by step details.

Should I oil my clippers before or after use?

Hair clippers can be oiled before and after use. However, it is to oil your hair clippers after you have cleaned and sterilized your blades. This allows the oil more surface area to lubricate your blades.

How often should I oil my clippers?

You should be looking to oil your hair clippers every 2-3 uses, this will keep your blades well lubricated but not drowning in oil.

Will oil treat my already rusted blade?

Hair clipper oil does not repair rusted blades? The rust will have to clean away or the blade will have to be replaced. However consistent use of hair clipper oil will help to prevent hair clipper rust.

Is it best to have oil clippers wet or dry?

Hair clipper blades should be oiled dry if you want the maximum effect. Not only do wet hair clipper blades develop rust but they also repel the oil, meaning the oil cannot deeply lubricate the blade.

Final words

In conclusion, a cleaning and lubricating spray is a fantastic product for electric shaver users, especially those without an automatic cleaning station.

These sprays are affordable, widely available, and easy to apply, providing a closer and more comfortable shave while extending the lifespan of your shaver’s foils and blades. If you have any further questions, feel free to post them in the comments below.

Bradley Martyn

Hey. I’m Bradley, the founder and editor of Trimmereo. I independently buy and test trimmers; electric shavers and I’ve been sharing my findings on this site for more than 8 years, hopefully helping others choose the right shaver.

If you found the information useful, consider subscribing to the Trimmereo newsletter as well. It’s free and I only send a few emails per month. Unsubscribe at any time.

Leave a Comment